34160 - Brass Thimbles 5/16

This set consist of the lower entry and one upper for 5/16 rods. Octagon body with raised bands at each end. ***The tabs are not straight on these thimbles so plan for this when inletting.***

34165 - Steel Thimbles 5/16

This set consist of the lower entry and one upper for 5/16 rods. Octagon body with raised bands at each end. ***The tabs are not straight on these thimbles so plan for this when inletting.

34170 - German Silver Thimbles 5/16

This set consist of the lower entry and one upper for 5/16 rods. Octagon body with raised bands at each end. ***The tabs are not straight on these thimbles so plan for this when inletting.***

34360 - Brass English Dragoon Thimble Set

A copy of 1760’s English Dragoon pistol thimbles. Consists of lower entry pipe and one upper thimble in 5/16” European rods always tapered heavily from tip to tip.

34365 - Steel English Dragoon Thimbles Set 5/16

Steel English Dragoon Thimbles Set 5/16".

34370 - German Silver English Dragoon Thimble Set 5/16

34560 - Brass Georgian Thimble Set

A copy of 1690 English Georgian pistol thimbles. Consists of lower entry pipe and one upper thimble. The original rod tapered from a 20 gauge tip to a tiny 3/16" diameter. These thimbles are 1/4". My ramrods usually taper from 1/4" at the tip to just under 3/16" at the small end.

34565 - Steel Georgian Thimble Set

A copy of 1690 English Georgian pistol thimbles. Consists of lower entry pipe and one upper thimble. The original rod tapered from a 20 gauge tip to a tiny 3/16" diameter. These thimbles are 1/4". My ramrods usually taper from 1/4" at the tip to just under 3/16" at the small end.

34570 - GS Georgian Thimbles 1/4

A copy of 1690 English Georgian pistol thimbles. Consists of lower entry pipe and one upper thimble. The original rod tapered from a 20 gauge tip to a tiny 3/16" diameter. These thimbles are 1/4". My ramrods usually taper from 1/4" at the tip to just under 3/16" at the small end.

34660 - Brass Danish Thimble Set

A copy of 1690’s Danish Gentleman’s pistol thimbles. Consists of lower entry pipe and one upper thimble in 1/4.” Original rod tapered from 1/4" at the tip to 3/16” at the opposite end.

34665 - Steel Danish Thimble Set

A copy of 1690’s Danish Gentleman’s pistol thimbles. Consists of lower entry pipe and one upper thimble in 1/4.” Original rod tapered from 1/4" at the tip to 3/16” at the opposite end.

34670 - GS Danish Thimble Set

A copy of 1690’s Danish Gentleman’s pistol thimbles. Consists of lower entry pipe and one upper thimble in 1/4.” Original rod tapered from 1/4" at the tip to 3/16” at the opposite end.

34760 - Brass Martinoni Thimble Set

A copy of 1700 Italian pistol thimbles. Consists of lower entry pipe and one upper thimble in 1/4”. European rods always tapered heavily from tip to tip.

34765 - Steel Martinoni Thimble Set

A copy of 1700 Italian pistol thimbles. Consists of lower entry pipe and one upper thimble in 1/4”. European rods always tapered heavily from tip to tip.

34770 - GS Martinoni Thimble Set

A copy of 1700 Italian pistol thimbles. Consists of lower entry pipe and one upper thimble in 1/4”. European rods always tapered heavily from tip to tip.

TH-700-B Chiseled Jaeger rifle thimbles 7/16 to 5/16 brass

Set of nicely chiseled Jaeger thimbles in brass. Set of two upper and one lower. The inside of the upper thimble measures about .425 , so you will have to sand down a 7/16" ramrod to fit. The inside of the lower thimble measures about.360. Overall length of the entry pipe is 4 3/4" with the barrel portion being 1 1/2", OAL of the uppers is 1 1/2".

TH-700-GS Chiseled Jaeger rifle thimbles 7/16 to 5/16 German silver

Set of nicely chiseled Jaeger thimbles in German silver. Set of two upper and one lower. The inside of the upper thimble measures about .425 , so you will have to sand down a 7/16" ramrod to fit. The inside of the lower thimble measures about.360. Overall length of the entry pipe is 4 3/4" with the barrel portion being 1 1/2", OAL of the uppers is 1 1/2".

TH-700-I Chiseled Jaeger rifle thimbles 7/16 to 5/16 steel

Set of nicely chiseled Jaeger thimbles in steel. Set of two upper and one lower. The inside of the upper thimble measures about .425 , so you will have to sand down a 7/16" ramrod to fit. The inside of the lower thimble measures about.360. Overall length of the entry pipe is 4 3/4" with the barrel portion being 1 1/2", OAL of the uppers is 1 1/2".

TH-CA-GS Carlsbad Jaeger rifle thimbles - German silver

Set of cast thimbles from a Carlsbad region Jaeger rifle, made for a tapered ramrod, in German silver. Set of two uppers and one lower. The inside of the entry thimble measures .380 with an overall length of 3 1/2" with the barrel portion being 1 1/8" long. The inside of the middle thimble measures .400 with an overall length of 1 1/4". The inside of the upper thimble measures .435 with an overall length of 1 5/16". The skirt of the entry thimble is engraved with a stag and all three of the pipes have neat borders engraved on each octagon section.

TH-CA-I Carlsbad Jaeger rifle thimbles in steel

Set of cast thimbles from a Carlsbad region Jaeger rifle, made for a tapered ramrod, in steel. Set of two uppers and one lower. The inside of the entry thimble measures .380 with an overall length of 3 1/2" with the barrel portion being 1 1/8" long. The inside of the middle thimble measures .400 with an overall length of 1 1/4". The inside of the upper thimble measures .435 with an overall length of 1 5/16". The skirt of the entry thimble is engraved with a stag and all three of the pipes have neat borders engraved on each octagon section.

TH-LTDR-B- Brass Eliott Light Dragoon Thimble 3/8

Brass Eliott Light Dragoon Thimble 3/8". The light dragoon only used one upper thimble and no entry. This thimble is for a 3/8" ramrod which originally tapered considerably. To the best of my knowledge, these pistols were only made with walnut stocks and brass hardware!

TH-LTDR-G - German silver Eliott Light Dragoon Thimble 3/8

German silver Eliott Light Dragoon Thimble 3/8". The light dragoon only used one upper thimble and no entry. This thimble is for a 3/8" ramrod which originally tapered considerably. To the best of my knowledge, these pistols were only made with walnut stocks and brass hardware!

TH-LTDR-I - Steel Eliott Light Dragoon Thimble 3/8

Steel Eliott Light Dragoon Thimble 3/8". The light dragoon only used one upper thimble and no entry. This thimble is for a 3/8" ramrod which originally tapered considerably. To the best of my knowledge, these pistols were only made with walnut stocks and brass hardware!

TH-ROC-GS Jaeger rifle thimbles in GS

Set of cast thimbles from a Rococo styled Jaeger rifle. The inside of the thimbles measures .330 with an overall length of upper thimbles 1 7/16" and entry is 3 7/8". The skirt of the entry thimble is chiseled with a nice rococo design.***The design near the tip of the finial has some missing chiseling so it will need touched up.*** This is for a 5/16" ramrod***